Performance & Efficiency

AeroCool Pro Series

AeroCool Pro SeriesSet the comfort level for you and your family and the AeroCool Pro-Series evaporative air cooler does the rest. Combined with the Pro-Stat programmable thermostat, the AeroCool Pro-Series will automatically and efficiently operate the equipment to best maintain your comfort level while using the least amount of energy.

High Efficiency Rigid Media

The AeroCool Pro Series features the Pro-4×4 High Efficiency Media to provide the coolest air possible while employing the Pro-Clean System to help maintain the entire system. The AeroCool Pro Series and its integrated systems work hard to help bring together both performance and efficiency while providing worry-free reliability.

The Pro-Clean System

The Pro-Clean System maintains the cleanliness of your evaporative cooler by automatically draining the cooler and refilling with fresh clean water, thus avoiding scale build-up. The water used in the evaporative process is stored in-side the fully encapsulated Pro-Armor wet section. The AeroCool® Pro-Series includes the Pro-Shield weatherizing panel for use in the off-season to prohibit heat loss and unwanted air from entering the home during colder months. Defending the media from the elements of winter can also extend the life of your unit.

  • Features & Benefits
  • Specifications
  • Dimensional Data
  • Image Resource

cut away imageBenefits of the Aerocool® Pro Series

This high-efficiency blend of media delivers colder air than any other home comfort evaporative cooler sold today.
Pro-4×4 Media

Pro-4×4 Media (1)
This high-efficiency blend of media delivers colder air than any other home comfort evaporative cooler sold today.

Pro-Armor (2)
The premier single inlet cooler with polymeric inner structure that completely shields the wet section from corrosive interaction.

Easy Access Gravity-Held Doors (3)
Easy to remove access doors reduce maintenance time.

Pro-Stat
The cooler’s “brain” saves money by giving just the right amount of cool all the time. The new “Softspeed Transition” feature creates smoother operation when the motor automatically changes speed.

Low Sump pump (5)
The most powerful pump on the market today. US Patent #5,527,157

Flomate (6)
Flomate-quality water distribution system improves wet-out. US Patent #5,130,063

Pro-Clean System (7)
Drains and washes the unit daily and can save as much as 3,000 gallons of water a month as compared to standard bleed-off system. US Patent 5,527,157

PMI’s exclusive MIRROSCOPPIC Blower shaft finish process yields a 90% improvement over the industry standard “ground finish”.  This means quieter operation as well as longer bearing and shaft life for your cooler! PMI Exclusive MIRROSCOPIC™ Blower Shaft Finishing Process
This yields a 90% improvement over the industry standard “ground finish”. This means quieter operation and longer bearing and shaft life for your cooler!

Factory Installed Wired Motors (9)
All components are completely pre-wired by the factory, thus reducing installation time and increasing reliability.

Pro-Shield
This weatherizing panel prohibits outward heat loss and cold air from entering into your home during the off-season. Easy to install, media protection is also afforded thereby increasing the life of the unit.

Choosing the right Pro-Series

Choosing the right Pro-Series model is important for proper operation. For maximum performance, choose the model with the proper rating and motor as well as the correct duct configuration. Ask your qualified contractor to help you choose the correct Pro-Series model that best fits your home and your needs.

Down Draft

Down Draft

Side Draft

Side Draft

Specifications
Model NumberIndus. STD RatingAir Delivery CFM (Cubic Feet Per Minute)Electrical Specifications
0.0”0.1”0.2”0.3”0.4”0.5”HPSpdVoltsAmps
PD4802/PD423248003450320030502950250023103/42115/23011.9/6.4
PH4802/PH4232115/230
PD6802/PD6232680044304310413539903695346012115/23014.1/7.4
PH6802/PH6232115/230

aerocool-pro-down-discharge.jpgaerocool-pro-side-discharge.jpg

Pro Series Engineering Data
Model
Number
CabinetDuct OpeningEFGIJOMPSBlower WheelShaft Dia.Belt LengthPully ODOper. Wt.Ship Wt.
HWDABDiaWidth
PD4802
PD4232
27 5/16424317 3/417 3/417265 1/22313 1/213 1/4131 1/212 1/8161615410195177
PH4802
PH4232
27 5/16424317 3/417 3/417265 1/22313 1/213 1/4131 1/212 1/8161615510197179
PD6802
PD6232
34 5/16424519 3/419 3/417285 1/22513 1/213 1/4131 1/211 1/8191816212232217
PH6802
PH6232
34 5/16424519 3/419 3/417285 1/22513 1/213 1/4133 5/1611 1/8191816512232217

UL ListedSpecifying U.L. Listed Models

 When specifying or ordering U.L. Listed models, add a “U” prefix to the front of the appropriate model number. In order to maintain this U.L. designation, these models must be used in conjunction with PMI supplied motor kits and pumps.

Example: UPD4802

AeroCool Pro Series
AeroCool Pro Series Down Draft
AeroCool Pro Series Side Draft
Aerocool Pro Series Side Draft

AeroCool Pro Series

  • Product Literature

  • Frequently Asked Questions